The Prout SLY-69 achieves the strength essential in catamaran design by bonding the bulkheads into a one piece hull molding to form deep box sections, and then by bonding the one piece deck molding to the hull and bulkheads to create a monocoque shell. The hull has integrated longitudinal and transverse mini-nacelles designed specifically to increase stiffness. The bulkheads are strategically located to absorb torsion and compression loads inherent in a catamaran’s structure. The hull is fully resin infused with E-Glass and epoxy resin and it contains a closed-cell PVC foam core to ensure strength and integrity and far superior impact resistance – compared to a traditional solid skin lay-up. Bulkheads and cabin soles are also produced using resin infusion to reduce weight and increase stiffness. The deck is produced using resin infusion and it also contains a PVC foam core, which is sandwiched using quad axial cloth. Watertight bulkheads fore and aft add buoyancy and security in the event of collision and ensure the watertight integrity of the boat.

HULL AND DECK

• FRP with epoxy resin infused ‘E-Glass’ uni-directional, quad axial cloth and foam core
• Reinforced with carbon graphite and Kevlar materials
• Teak inlaid cockpit sole
• Contrasting non-skid on side decks
• Foam core bulkheads and cabin soles
• Bronze thru-hull fittings
• Hull and deck laminated, bolted and bonded
• Fourteen (14) opening ports in hull
• Lexan or double layer safety glass windows fitted with Sikaflex
• Anchor and stowage lockers forward
• Molded guest seating area forward with large coffee table
• Twin love seats opposite of forward seating area
• Jet ski storage area on bow
• Large teak inlaid signature “Beach Deck”™ on stern
• Wave piercing or Axebow hull design

DECK HARDWARE

• Four (4) opening deck hatches
• 316 SS custom safety side rails
• 316 SS side boarding gate
• 316 SS pulpits with teak seats
• 316 SS boarding ladder
• 316 SS 6 x 12” cleats
• 316 SS 2 x 10” spring cleats (amidship)
• Two (2) deck water fillers
• Two (2) deck fuel fillers
• Two (2) deck waste pump outs
• Six (6) fenders
• Six (6) dock lines: 4 x 20 m (65.5 ft) and 2 x 25 m (82 ft)
• Electric anchor windlass
• Hot/cold transom shower
• Seawater deck wash-down

COCKPIT

• Portside large curved settee in cockpit
• Large teak cockpit table
• Starboard side curved settee with teak cockpit coffee table
• Storage under seating
• Bar forward with twin stools
• Space for entertainment center
• 2 cockpit stereo speakers
• Sunbrella® seat cushion covers
• Courtesy floor lighting
• Teak grate at entry to salon
• Sliding doors to salon
• Life raft storage

FLYBRIDGE

• Curved molded stairs with teak inlaid steps to flybridge
• SS and FRP radar, antennae and navigation light mounts
• SS grab rails around flybridge
• Large U-shaped seating to port with storage underneath
• Teak luncheon/cocktail table
• Forward facing settee to starboard
• Bar with 2 stools
• Single helm seat forward on center line with Sunbrella® cushions
• Molded console aft with barbecue grill, sink and refrigerator
• Aft facing settee to port of console
• Large settee facing console
• 2 flybridge stereo speakers
• Large area for sunning

SALON

• Panoramic view through large fixed windows
• Portside U-shaped dining settee
• Wood dining table for 6
• Starboard side bar at galley with 4 stools
• Curved settee to starboard
• Lounge settee facing starboard settee
• Raised navigation center forward with space for comprehensive navigation package – Raymarine or similar
• Navigation center at helm with helm seat
• J-shaped settee to port of helm with dining table
• Curved settee to starboard of helm with coffee table
• Forward entertainment center with LCD HDTV, DVD, CD, AM/FM
• Three (3) cabin access companionways
• Headliner combination of wood battens and leather
• SS accent overhead lighting
• Courtesy floor lighting
• Interior upholstery from a selection of leather
• Teak or teak and holly sole

GALLEY

• U-shaped galley
• Marble/honeycomb counter tops with double SS sink
• Upright refrigerator
• Freezer
• Four burner electric or LPG stove/oven
• Microwave oven
• Wood cabinet
• Custom storage
• Fan

MASTER STATEROOM ( Full-beam Forward )

• King size walk around berth on center line
• Storage under berth
• Extra-large hanging lockers
• L-shaped lounging settee
• 3 person settee with coffee table
• Full size desk with chair
• Two (2) fans
• SS overhead light fixtures
• SS reading light
• Courtesy floor nightlight
• Lewmar opening ports
• Large overhead hatch with shade and screen
• Teak or teak and holly sole

MASTER HEAD AND SHOWER ( Port )

• Separate shower compartment FRP
• Electric flush toilet in separate compartment
• Marble/honeycomb counter tops with twin basins
• Mirrors
• Storage under basins
• SS tissue rollers
• SS towel/clothing loops and hooks
• SS accent overhead light fixture
• Lewmar opening port
• Large overhead hatch with shade and screen

AFT STATEROOMS ( Port and Starboard )

• Queen size tapered berth
• Storage under berth
• Large hanging locker
• Seat
• Fan
• SS overhead light fixtures
• SS reading light
• Courtesy floor nightlight
• Lewmar opening port
• Large overhead hatch with shade and screen
• Teak or teak and holly sole

AFT HEADS AND SHOWERS ( Port and Starboard )

• Separate shower compartment FRP
• Electric flush toilet
• Marble/honeycomb counter tops with double basin
• Mirror
• Storage under basin
• SS tissue roller
• SS towel/clothing loops and hooks
• SS accent overhead light fixture
• Lewmar opening port

CREW ACCOMODATIONS

• Crew accommodations in bows
• Double bunk in bow
• Simple, complete crew’s washroom attached to crew room

STORAGE ROOM

• Large storage room underneath wheelhouse
• Space for washer/dryer

ENGINE AND MACHINERY

• Twin Volvo Penta IPS 600 engines
• Dual high-amp 24v alternators
• Water engine cooling system
• Engine instrument panel at helm positions
• Fuel tanks in GRP epoxy (1,893 liters)
• Racor 500 series fuel filters
• Twin three/four blade propellers

PLUMBING

• Eight (8) automatic bilge pumps (1,000 GPH each) four in each hull
• Two manually operated bilge pumps 35 gal/min
• Hot and cold pressure water system
• Aqua Matic 700-1 700 GPD or similar water maker
• Two (2) fresh water tanks with 1,041 liter total capacity (275 gallons)
• Two (2) water heater (2 x 35 liter tanks)
• Two (2) black water tanks (2 x 150 liter tanks)
• Black water direct overboard discharge via “Y” valve and pump out through deck pump-out fitting
• Two (2) aluminum propane gas bottles in self-draining lockers
• Hot/cold shower on starboard transom

ELECTRICAL

• Voltage: 24v DC
• Onan 17.5 kW, 120/240v AC, 60 Hz generator or similar
• Marine Air air-conditioning system total 120,000 BTU
• Inverter/charger 24v DC, 2500 watt, 130 amp, 120v AC
• Custom 24v DC/120v AC electrical distribution panel with circuit breakers
• Battery combiner integrated with the electrical system
• Shore power provides 220/110v AC
• Batteries to be sealed gel type: house and engine starting
• House: four (4) deep cycle total 800AH to run all domestic services
• Engine start batteries: 2 x 120AH batteries
• Generator start battery: 120AH battery
• Wiring – all marine cables to be Lloyds, ABS or CE approved
• Battery charging from high output alternators, generator, or dual shore power receptacles
• Lighting throughout will be 24v DC
• Mast lights: navigation lights, anchor light, steaming light, tri-color and two deck lights
• Sixteen (16) electrical outlets throughout
• Two (2) 50 foot shore power cords with Hubble fittings
• Alarm system: environment – high bilge, gas, fire/smoke/heat alert;  machinery – high water temp, low oil pressure on main engine and generator; high oil temp and low oil pressure on transmission and reduction gear

NAVIGATION AND ELECTRONICS

• Compass at helm with light and dimmer
• Raymarine ST60 or similar speed/depth instruments
• Raymarine VHF radio at navigation station
• Raymarine RayMic at helm position
• (2) Raymarine E120 MSD or similar chart plotters
• Raymarine GPS sensor interfaced with MSD
• Raymarine ST60 series autopilot interfaced with MSD
• Raymarine autopilot remote for use at navigation station

INTERIOR FINISH

• Hull interior surfaces to be leather
• Salon and stateroom upholstery to be choice of leather
• Wood trim teak standard
• Cushions for settees to be of high grade foam of 100-150 mm
• Mattresses to be latex
• All hardware to be SS as standard

GENERAL

• Interprotect epoxy barrier coating on bottom
• Antifouling paint

Specifications and component part manufacturers are subject to change. All dimensions, sizes and volumes listed are approximate.  The shipyard reserves the right to modify any specifications without notice.